==== Front JMIR Res Protoc JMIR Res Protoc ResProt JMIR Research Protocols 1929-0748 JMIR Publications Toronto, Canada v9i12e22570 33146625 10.2196/22570 Proposal Proposal Mitigating Health Risks to Reopen a Clinical Research Laboratory During the COVID-19 Pandemic: A Framework Eysenbach Gunther Banik Palash Poluru Ramesh Walker Eloise M BSc, MSc, PhD1https://orcid.org/0000-0003-3132-8861 Jasper Alice E BSc1https://orcid.org/0000-0001-9294-1200 Davis Lauren BSc, MRes1https://orcid.org/0000-0002-8597-7747 Yip Kay Por BM, BMedSci, MRCP1https://orcid.org/0000-0002-6615-0066 Faniyi Aduragbemi A BSc, MSc, PhD1https://orcid.org/0000-0003-1670-1680 Hughes Michael J BSc, MRes1https://orcid.org/0000-0002-5793-415X Crisford Helena A BSc, MSc1https://orcid.org/0000-0002-5522-1543 Spittle Daniella A BSc, MRes1https://orcid.org/0000-0002-4054-0314 Sapey Elizabeth BSc, MBBS, PhD, FRCP12https://orcid.org/0000-0003-3454-5482 Belchamber Kylie B R BSc, PhD1https://orcid.org/0000-0003-3241-258X Scott Aaron BSc, MSc, PhDhttps://orcid.org/0000-0001-9325-50261Birmingham Acute Care Research GroupInstitute of Inflammation and AgeingUniversity of BirminghamEdgbastonBirmingham, B15 2TTUnited Kingdom44 121 371 3257a.scott@bham.ac.uk 1 Birmingham Acute Care Research Group Institute of Inflammation and Ageing University of Birmingham Birmingham United Kingdom 2 NIHR Clinical Research Facility Birmingham University Hospitals Birmingham NHS Foundation Trust Birmingham United Kingdom Corresponding Author: Aaron Scott a.scott@bham.ac.uk 12 2020 4 12 2020 4 12 2020 9 12 e2257016 7 2020 10 10 2020 26 10 2020 28 10 2020 ©Eloise M Walker, Alice E Jasper, Lauren Davis, Kay Por Yip, Aduragbemi A Faniyi, Michael J Hughes, Helena A Crisford, Daniella A Spittle, Elizabeth Sapey, Kylie B R Belchamber, Aaron Scott. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 04.12.2020.2020This is an open-access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work, first published in JMIR Research Protocols, is properly cited. The complete bibliographic information, a link to the original publication on http://www.researchprotocols.org, as well as this copyright and license information must be included.Background The COVID-19 pandemic has led to many countries implementing lockdown procedures, resulting in the suspension of laboratory research. With lockdown measures now easing in some areas, many laboratories are preparing to reopen. This is particularly challenging for clinical research laboratories due to the dual risk of patient samples carrying the virus that causes COVID-19, SARS-CoV-2, and the risk to patients being exposed to research staff during clinical sampling. To date, no confirmed transmission of the virus has been confirmed within a laboratory setting; however, operating processes and procedures should be adapted to ensure safe working of samples of positive, negative, or unknown COVID-19 status. Objective In this paper, we propose a framework for reopening a clinical research laboratory and resuming operations with the aim to maximize research capacity while minimizing the risk to research participants and staff. Methods This framework was developed by consensus among experienced laboratory staff who have prepared to reopen a clinical research laboratory. Results Multiple aspects need to be considered to reopen a clinical laboratory. We describe our process to stratify projects by risk, including assessment of donor risk and COVID-19 clinical status, the COVID-19 status of the specific sample type, and how to safely process each sample type. We describe methods to prepare the laboratory for safe working including maintaining social distancing through signage, one-way systems and access arrangements for staff and patients, limiting staff numbers on site and encouraging home working for all nonlaboratory tasks including data analysis and writing. Shared equipment usage was made safe by adapting booking systems to allow for the deployment of cleaning protocols. All risk assessments and standard operating procedures were rewritten and approved by local committees, and staff training was initiated to ensure compliance. Conclusions Laboratories can adopt and adapt this framework to expedite reopening a clinical laboratory during the current COVID-19 pandemic while mitigating the risk to research participants and staff. clinical laboratoryrisk assessmentCOVID-19SARS-CoV-2frameworkresearchrisklabsafety ==== Body Introduction The novel coronavirus SARS-CoV-2, causing the disease COVID-19, emerged from China in December 2019 with the World Health Organization declaring the outbreak a public health emergency of international concern on January 30, 2020. Since then, many countries have implemented lockdown measures with only essential work allowed. This has impacted many workplaces, including laboratories, which have had to suspend research. With lockdown measures being gradually eased, many laboratories are now preparing to reopen. Reopening clinical research laboratories in the wake of COVID-19 presents a particular challenge because many patients’ biological samples are likely to have an unknown SARS-CoV-2 status at the time of sampling. The Advisory Committee on Dangerous Pathogens have classified SARS-CoV-2 as a HG3 (Hazard Group 3) pathogen [1]. This requires specific procedures to be implemented under stringent safety approval processes. Many laboratories will not meet the specific requirements needed to handle and process samples that are COVID-19 positive or have unknown status. The transmission risks and pathogenicity of this virus is still unclear. However, there is growing scientific evidence on many aspects of the virus biology, and this has helped to inform public health measures including the reopening of workplaces. SARS-CoV-2 is capable of human to human transmission, with aerosol transmission of the virus also documented [2-4]. The virus is mainly spread through inhalation of respiratory droplets produced when an infected individual coughs or sneezes [5-7]. Respiratory droplets can also contaminate surfaces, and as such, fomite transmission can occur. Current evidence indicates that the virus may survive up to 72 hours on stainless steel and plastic with a half-life of approximately 5.6 hours and up to 24 hours on cardboard and up to 4 hours on copper [4]. However, whether the virus is still capable of causing infection over this time course has yet to be demonstrated. The half-life of SARS-CoV-2 in aerosols was shown to be approximately 1.2 hours [4]. To prevent spread, current government guidelines specify a social distance from persons not from the same household of 1-2 meters and encourage regular hand washing for at least 20 seconds in soapy water [8]. The clinical symptoms of COVID-19 are varied, ranging from no symptoms (asymptomatic) and those mimicking a common cold to a severe respiratory disease including pneumonia and progression to acute respiratory distress syndrome. Early symptoms of COVID-19 are characterized by one or more of the following: a persistent cough, a fever, and a change in or loss of taste and/or smell [9,10]. Current government guidelines state that if one of more of these symptoms is experienced, a person must self-isolate for 14 days. Evidence suggests a temporal pattern of viral shedding with viral load at its highest shortly after disease onset with a gradual decrease over time [11,12]. To date, the evidence on the role of asymptomatic carriers in SARS-CoV-2 transmission is unclear. However, the virus has been detected in individuals who do not exhibit any symptoms of the disease [13]. Until more is known, it is important to consider the possible risk of asymptomatic carriage when assessing the risks to individuals within a workplace. In the laboratory setting, it may not be possible to test patients prior to biological sample donation. Levels of viral RNA (ribonucleic acid) detected in blood samples appear to be low [14]. In a study carried out on 307 blood samples from patients with COVID-19, only 1% tested positive via polymerase chain reaction (PCR). No viral RNA was detected in urine samples from the same patients [15]. These sample types therefore pose a lower risk to individuals handling them compared to respiratory tract samples. Bronchoalveolar lavage fluid specimens and sputum samples showed the highest viral loads detected with 93% and 72% of samples with a positive PCR result, respectively [15]. Upper respiratory tract samples, nasal swabs, and pharyngeal swabs have been routinely used for testing during the COVID-19 outbreak. A study comparing viral detection in nasal swabs and saliva samples in persons not displaying any obvious clinical signs of COVID-19 found that not only was the virus detected in saliva samples, but that the cycle threshold (Ct) values were lower than that of throat swabs from the same individuals, suggesting that viral load may be higher in saliva than in throat swab samples. Individuals testing positive by saliva samples later went on to develop clinical symptoms [16]. To date, no confirmed transmission of the virus has been confirmed within a laboratory setting. However, laboratory work must be altered, and the appropriate processes and procedures need to be put in place to ensure a safe working environment if samples are of positive or unknown COVID-19 status. SARS-CoV-2 is easily destroyed by alcohol [17] and soap [18] due to disruption of the protein envelope. Therefore, handwashing remains an extremely effective way of breaking fomite transmission; 70% ethanol is an effective disinfectant within a laboratory setting. There remain considerable uncertainties in reopening clinical research laboratories that process human samples and have a disease-based focus. Resuming laboratory activities including sample taking and processing requires consideration of a number of risks, which, broadly speaking, can be divided into: Risks to the research participant (in attending the clinical laboratory setting and being close to research staff or other research participants) Risks to the research staff (from exposure to patients, processing samples, and working with others in a laboratory facility) This paper provides a suggested framework that may inform how clinical laboratory operations can be resumed with the aim to maximize research capacity while minimizing the risk to research participants and staff. Methods This framework was developed by consensus among experienced laboratory staff who have prepared to reopen a clinical research laboratory. Staff included 1 consultant in respiratory medicine and professor of acute and respiratory medicine, 1 respiratory registrar, and 8 immunologists working in a translational laboratory. Results Project Classification and Risk Assessment To allow resumption of research as quickly but safely as possible, studies/projects should be stratified into categories by risk. This includes the participants’ demographics, medical history (with relevant bodies providing definitions of the levels of risk depending on disease area and severity [19,20]) and the likely COVID-19 status of the sample (positive, negative, or unknown). Ethically approved protocols may require amendments to incorporate these factors to mitigate risk where possible. It is also important to consider the status of the building that participants will be entering (hot, cold, or mixed site), and their ingress and egress routes through the facility. We recommend a risk assessment for every participant, which includes consideration of their medical history, likelihood of having COVID-19 (based on screening questionnaires), and the samples to be collected. Assessment of Donor Risk and COVID-19 Clinical Status Clinical research often requires samples from individuals presenting with existing medical conditions, which may predispose them to a more severe outcome if infected with SARS-CoV-2 [21-23]. These include demographic factors such as age [23,24], ethnicity [18], and smoking status [24-26]. It is important to identify which potential donors are high risk prior to attending clinical or research spaces in accordance with current government guidelines and initially prioritizing research participation for those deemed at less risk, if possible. Some participants will have a COVID-19 swab taken as part of their routine care (such as those admitted to hospitals or where directed by clinical care pathways). Where the participant is known to have COVID-19 infection, the risk to staff and the participant from donating samples are known and can be mitigated with appropriate personal protective equipment (PPE) and HG3 laboratory processing. Where COVID-19 is highly suspected clinically but not confirmed by SARS-CoV-2 swab, we recommend treating the sample as though positive, as per national guidelines. A negative swab cannot fully exclude COVID-19 infection due to the false-negative rates, but when combined with a low clinical suspicion of COVID-19 infection, could be assessed as “COVID-19 unlikely” in status, although many laboratories would still suggest using enhanced category 2 (Cat2+) for processing. In some instances, the COVID-19 status of the participant will be unknown (with no swab taken). Screening questionnaires to identify and avoid participants with potential COVID-19–related symptoms may help mitigate risk further, and following that, if clinical suspicion is low, Cat2+ processing should still be considered. We propose a simple workflow (Figure 1) to aid in stratifying donor groups by risk and capacity of the laboratory for handling high-risk pathogens. In brief, research donors may be screened remotely by an appropriately trained health care professional prior to presenting at the clinic to determine medical conditions, which may increase risk and active symptoms or known exposure to COVID-19. An example of this is presented in Multimedia Appendix 1. Once the health care professional is reassured that the individual is not an obvious risk, they may be invited to attend the clinic. Upon arrival, the individual should be reassessed to identify characteristic COVID-19 symptoms and signs such as an elevated temperature. If resources allow, individuals presenting both with or without clinical symptoms may be tested using an approved and recommended test such as PCR to confirm COVID-19 status, in the understanding that the time between swab and result may necessitate multiple patient visits to the research department. In the event that a test is not available or feasible, samples from patients with low clinical suspicion of COVID-19 may be taken for research. However, the appropriate PPE and procedures must be followed when taking samples which then must still be treated with caution during processing as asymptomatic carriage is common [13]. Figure 1 Donor risk flow diagram. Patients are first assessed by phone by a health care professional in the form of a questionnaire. If the patient is unable to be tested for COVID-19, the sample must be processed as status unknown according to Public Health England (PHE) guidance. If the patient can be tested and the test is returned negative, it is safe to assume minimal risk and proceed according to local risk assessments. If the test is returned positive, samples can only be taken if Hazard Group 3 (HG3) facilities are available and proceed according to local risk assessments. COVID-19 Status of Sample and Risk Assessment SARS-CoV-2 has been detected in several different clinical sample types, including blood, feces, and respiratory specimens (Table 1). Risk assessments for taking samples such as phlebotomy should be reviewed, amended, and approved before study resumption. Assessing the risk of each sample is imperative, and we propose a tricolor risk alert system as demonstrated in the flow diagram in Figure 2. Table 1 Viral detection and cultivation of live virus in clinical samples to date. Sample type Virus detected by PCRa Live virus cultivated Reference Nasal swab Yes Yes Yang et al [27]; Wang et al [15] Throat swab Yes Yes Yang et al [27]; Wang et al [15] Saliva Yes Yes To et al [11] Sputum Yes Yes Yang et al [27]; Wang et al [15] Bronchoalveolar lavage Yes Yes Yang et al [27]; Wang et al [15] Lung tissue Yes Yes Wang et al [15] Feces and rectal swab Yes No Wang et al [15]; To et al [11] Urine Yes No To et al [11] Blood Yes No To et al [11]; Wang et al [15] Sperm Yes No Li et al [28] aPCR: polymerase chain reaction. Figure 2 Clinical laboratory flow diagram for assessing sample risk. Individuals are first assessed by phone by a health care professional in the form of a questionnaire. If no clear risk is identified, patients may present at a clinic. Here, they will undergo a clinical observation to assess for characteristic symptoms of COVID-19. If resources allow, they may then undergo testing for the virus. The information will identify the risk of a particular patient sample and will inform decisions as to which samples can be taken and which can be processed safely. HG3: Hazard Group 3; PHE: Public Health England; RA: risk assessment; RT-PCR: reverse transcription-polymerase chain reaction; SOP: standard operating procedure. All samples with an unknown COVID-19 status (even if the risk is assessed as low; eg, whole blood sample from donor who has no clinical symptoms) should be processed under Cat2+ conditions, including use of a class II or class I microbiological safety cabinet in a category 2 laboratory but under aerosol tight conditions. Such procedures are specified in the risk assessment example in the online supplement. Any samples taken out of the cabinet should be placed inside at least two levels of containment. Samples used for processes performed outside of a microbiological safety cabinet such as flow cytometry or RNA extraction should first be inactivated or fixed by an approved and tested method such as 4% paraformaldehyde [25]. This should be documented in standard operating procedures and risk assessments. Any procedures involving the possible production of aerosols such as pipetting, vortexing, flow cytometry, and centrifugation should be risk assessed and the appropriate, approved procedures implemented. Samples may only be processed if the infrastructure and experience of staff allows for it. Cells from samples of unknown COVID-19 status must not be put into culture as this may inadvertently result in amplification of the virus if it is present [29-31]. High-Risk Patients and Samples Any sample from an individual with confirmed COVID-19 must be classified as high risk and treated as such. The highest viral loads have been detected in respiratory specimens [15], and as such these samples are deemed high risk if the COVID-19 status of the patient is positive or unknown. This includes bronchoalveolar lavage, sputum, and lung tissue samples [31], and therefore we recommend only processing lung tissue if the patient has been screened for COVID-19 and has been confirmed negative or low risk. All high-risk samples must be processed at category 3 level using appropriate containment. If such containment or trained staff are not available, such samples should not be taken or processed. New risk assessments should be written and official safety approval granted before working with high-risk specimens. High-Risk Patients and Lower-Risk Samples Viral presence in blood and urine has been shown to be varied; however, current evidence suggests that the virus is not always detectable in the blood or urine of COVID-19–confirmed cases. When it is, levels are low with no current evidence of infectivity from these samples. These sample types are therefore at a lower risk than respiratory samples. These samples can be processed within the context of amended risk assessments and official safety approval and in line with current safety guidelines, which will inform laboratories of the containment level required. Under current guidelines, this mandates Cat2+ conditions, operating under aerosol-free conditions at all times. Low-Risk Patients Samples taken from individuals with a confirmed COVID-19 negative test result are deemed to pose no added risk. As such, these samples can be processed and handled under the standard laboratory operating procedures with risk assessments and safety approval already in place. No further action is needed beyond the requirement to make the workplace safe as indicated below. Where the status of a patient is unknown, but clinical suspicion is low, we recommend processing within Cat2+ conditions, operating under aerosol-free conditions at all times. Preparing the Laboratory for Safe Working Social distancing is vital in a pandemic as discussed in a recent systematic review and meta-analysis by Chu et al [32], where a physical distance of 1 meter reduced the risk of betacoronavirus transmission by 82% and that every additional 1-meter increase in social distance doubled the relative protection. To prevent the risk of transmission between persons and through fomites, adherence to current government social distancing guidelines is necessary. Outlined below are several actionable suggestions to increase the safety of the workforce and to help staff to maintain distancing while maximizing research capacity. Signage, One-Way Systems, and Access Arrangements In order to maintain social distance within the laboratory/workplace, clear rules and signage should be put into place as follows: Clear signage and demarcations: signs on doors to laboratories, equipment rooms, offices, and toilets to indicate the number of persons inside at any given time. This will ensure that the capacity of the room is not exceeded and will allow persons to only enter the room if the capacity has not already been met. Signage may also indicate which specific working groups occupy a room at any given time. This can be in the form of a magnetic board or white board. A knock and call system: a knock and call procedure may be adopted for entering certain areas such as toilet areas. One-way systems around the building: if the layout of the workplace allows for this, one-way systems with clear signage will prevent individuals passing each other and will enable staff to maintain social distance while moving around the building. If the layout of the building does not allow this, the corridors may be split in two with directional traffic on each side. Directional systems must be clearly marked. Restricted access: it may be desirable to limit access to only specifically trained staff members to be on site. This will ensure that only authorized persons may gain access to the site. Staff should have their staff ID exhibited clearly at all times. Identifying High-Risk Staff, Limiting Staff Numbers on Site, and Encouraging Working From Home In order to reduce the risk to staff of catching and spreading the virus, clear rules must be put in place as follows: Identifying high-risk staff: there is clear evidence that certain groups of people are at a higher risk of severe illness if they contract COVID-19. In order to protect staff, it is essential to identify any individual who may fall into a high-risk category such as pregnant women or individuals with underlying medical conditions. Prior to returning to work, such individuals must have a meeting with their line manager to discuss potential hazards and work options. They must follow the current government recommendations on shielding of high-risk groups. This may mean that such staff members are temporarily moved onto other projects that only require working from home until it is safe for them to return to the laboratory. Alternatively, if space allows, designated work areas may be provided to avoid contact with other staff members. Encouraging working from home: unlike many other workplaces, laboratory work cannot be done from home. However, work such as data analysis, experiment planning, stock ordering, and writing should be done at home where possible. In the event that data analysis requires a specific software, piece of equipment, or there is limited access due to data security, procedures must be followed to make staff members safe as outlined below. Limiting the number of staff on site: in order to maintain social distancing, numbers of staff members on site will need to be reduced. This can be done by a combination of facilitating working from home where possible, by implementing a rota system and by prioritizing projects. Work Pods, Rotas, and Shared Working Strategies In order to meet social distancing guidelines, clear rules must be put in place as follows: Creating working groups (pods): restricting work activity to only occur within a small group of staff will limit spread amongst workers if an outbreak in the workplace does occur. Where possible, staff should be split into pods, whereby only members of each pod can occupy the laboratory or work space together at one time. When pods switch, all common areas must be cleaned. In the event that one member of a pod becomes ill and displays characteristic symptoms of COVID-19, all members of the pod must self-isolate until they have had a test confirming that they do not harbor the virus. Only then may they return to work. Splitting staff members into pods means that if one pod is required to isolate, other pods may continue to work. This helps to maintain research capacity and protects workers. Implementing work rotas and shift patterns: in order to meet social distancing rules and to maintain work pods, rotas will need to be established. Frequently changing requirements are common in translational research. As such, work rotas will need constant management to meet as many requirements of staff members as possible without breaking the pod system. We have found a daily rota split into two sessions (8:15 AM to 1 PM and 1:15 PM to 6 PM) is the best option for maximum flexibility. A short time period in between pod switchover will ensure that individual pods do not come into contact with each other when entering and exiting the building. On some days, a pod may take up both sessions. Time must be allocated at the end of each shift to allow for cleaning of the work area to prepare for the arrival of the next pod. Teamwork and work sharing: teamwork will be essential in order to complete work within the allotted time frame, as staff may require help from team members. Collaborative experiments will be more common. For example, researchers in Pod A could process blood samples, isolate, and prepare cells during the first shift, and researchers in Pod B could carry out functional assays on these cells during the second shift. Experimental planning: all researchers recognize that time management is a key skill that must be employed to efficiently plan a working day. However, as mentioned above, staff will need to adhere to strict timelines. Therefore, time management and experiment planning will be the key to efficient working. Experimental plans must be made and agreed in advance to allow for rota organization. Equipment Usage In order to ensure a safe working environment using shared equipment, clear rules must be put in place as follows: Equipment booking systems: to ensure social distancing is maintained, equipment usage should be booked in advance. If online systems are not available for this, a simple shared calendar will meet this need. Only one person should use equipment at any one time and social distance measures must be put in place around the equipment area. Extra time must be added in for each session to allow for equipment cleaning, plus an extra 15 minutes [33] to allow any aerosols to settle before the next person enters the space. Removal of nonessential shared equipment: any nonessential equipment such as coffee machines or microwaves in communal areas should be removed. Equipment cleaning: all equipment should be wiped down with 70% ethanol before and after use. Cleaning of equipment should be documented to ensure that it is done and to indicate to the next person that the area is clean. Equipment maintenance: procedures must be put in place for equipment repair or maintenance. Engineers must only be allowed on site to attend to equipment if it is safe for them to do so. Such individuals must not come into contact with any staff members unless it is absolutely necessary. PPE and Hand Gel Stations (Staff Hygiene) In order to limit the risk of transmission, clear rules and signage must be put in place as follows: Appropriate PPE as stated in the local risk assessment should always be worn. In the event that social distancing is not possible, masks and goggles may be required. In these instances, a risk assessment should be written and approved and appropriate PPE identified. Personal PPE such as lab coats and goggles should be stored separately to prevent cross contamination. It may be beneficial to provide hand sanitizers around the workplace. This will encourage staff members to keep their hands clean and therefore help to reduce fomite transmission. Amended Standard Operating Procedures and Risk Assessments In order to ensure sample types are handled safely, changes to operating procedures must be made as follows: All local risk assessments and standard operating procedures should be reviewed and, if required, amended and reapproved by local committees. All clinical samples should be assessed as recommended in the previous section. It is important that samples that are COVID-19 confirmed or of unknown COVID-19 status are stored and labeled appropriately. Designated sample reception areas are needed. In order to ensure safety, designated sample reception areas should be established for samples that are COVID-19 positive or those with an unknown COVID-19 status. Such areas should be clearly marked. Appropriate waste receptacles, PPE donning and doffing areas, and disinfectants should be available at these stations. Individuals working in such areas must wear the appropriate PPE as stated in the documentation and the location of the reception area must be selected with social distance measures in mind. Work Checks It is important to have a record of which staff members are on site at any given time. This information will be required if an outbreak does occur in the workplace in order to carry out contact tracing and to ensure all the appropriate staff self-isolate if required. It is important to ensure that all staff members adhere to the local rules laid out with appropriate checks conducted to emphasize best practices. Discussion These proposed flowcharts and working patterns are suggested to identify and mitigate risk to research participants and staff during the COVID-19 pandemic. The central components of these guidelines are based on advice from Public Health England and the UK government but can be adapted as needed. Authors' Contributions: EMW, AEJ, LD, KPY, AAF, MJH, HAC, DAS, ES, KBRB, and AS wrote the paper. All authors read and approved the final manuscript. Conflicts of Interest: None declared. Appendix Multimedia Appendix 1 Risk assessment. Abbreviations Cat2+enhanced category 2 Ctcycle threshold HG3Hazard Group 3 PCRpolymerase chain reaction PPEpersonal protective equipment RNAribonucleic acid ==== Refs 1 COVID-19: safe handling and processing for samples in laboratories Public Health England 2020 7 16 2020-07-15 https://www.gov.uk/government/publications/wuhan-novel-coronavirus-guidance-for-clinical-diagnostic-laboratories/wuhan-novel-coronavirus-handling-and-processing-of-laboratory-specimens 2 Fears A Klimstra W B Duprex P Hartman A Weaver S C Plante K C Mirchandani D Plante J A Aguilar P V Fernández D Nalca A Totura A Dyer D Kearney B Lackemeyer M Bohannon J K Johnson R Garry R F Reed D S Roy C J Comparative dynamic aerosol efficiencies of three emergent coronaviruses and the unusual persistence of SARS-CoV-2 in aerosol suspensions medRxiv. Preprint posted online April 18, 2020 10.1101/2020.04.13.20063784 10.1101/2020.04.13.20063784 32511433 3 Guo Z Wang Z Zhang S Li X Li L Li C Cui Y Fu R Dong Y Chi X Zhang M Liu K Cao C Liu B Zhang K Gao Y Lu B Chen W Aerosol and Surface Distribution of Severe Acute Respiratory Syndrome Coronavirus 2 in Hospital Wards, Wuhan, China, 2020 Emerg Infect Dis 2020 7 26 7 1583 1591 10.3201/eid2607.200885 10.3201/eid2607.200885 32275497 32275497 4 Santarpia JL Rivera DN Herrera VL Morwitzer MJ Creager HM Santarpia GW Crown KK Brett-Major DM Schnaubelt ER Broadhurst MJ Lawler JV Reid SP Lowe JJ Aerosol and surface contamination of SARS-CoV-2 observed in quarantine and isolation care Sci Rep 2020 7 29 10 1 10.1038/s41598-020-69286-3 5 Li Qun Guan Xuhua Wu Peng Wang Xiaoye Zhou Lei Tong Yeqing Ren Ruiqi Leung Kathy S M Lau Eric H Y Wong Jessica Y Xing Xuesen Xiang Nijuan Wu Yang Li Chao Chen Qi Li Dan Liu Tian Zhao Jing Liu Man Tu Wenxiao Chen Chuding Jin Lianmei Yang Rui Wang Qi Zhou Suhua Wang Rui Liu Hui Luo Yinbo Liu Yuan Shao Ge Li Huan Tao Zhongfa Yang Yang Deng Zhiqiang Liu Boxi Ma Zhitao Zhang Yanping Shi Guoqing Lam Tommy T Y Wu Joseph T Gao George F Cowling Benjamin J Yang Bo Leung Gabriel M Feng Zijian Early Transmission Dynamics in Wuhan, China, of Novel Coronavirus-Infected Pneumonia N Engl J Med 2020 3 26 382 13 1199 1207 10.1056/NEJMoa2001316 31995857 31995857 6 Galbadage T Peterson BM Gunasekera RS Does COVID-19 Spread Through Droplets Alone? Front Public Health 2020 4 24 8 163 10.3389/fpubh.2020.00163 10.3389/fpubh.2020.00163 32391310 32391310 7 Virus transmission NHS 2020 2020-07-15 https://www.england.nhs.uk/coronavirus/primary-care/about-covid-19/virus-transmission/ 8 Coronavirus (COVID‑19) Gov.uk 2020 2020-07-15 https://www.gov.uk/coronavirus 9 Symptoms of Coronavirus CDC 2020 5 13 2020-07-15 https://www.cdc.gov/coronavirus/2019-ncov/symptoms-testing/symptoms.html 10 Check if you or your child has coronavirus symptoms NHS 2020 2020-07-15 https://www.nhs.uk/conditions/coronavirus-covid-19/symptoms/ 11 To K Tsang Ot Leung W Tam Ar Wu T Lung Dc Yip Cc Cai J Chan Jm Chik Ts Lau Dp Choi Cy Chen L Chan W Chan K Ip Jd Ng Ac Poon Rw Luo C Cheng Vc Chan Jf Hung If Chen Z Chen H Yuen K Temporal profiles of viral load in posterior oropharyngeal saliva samples and serum antibody responses during infection by SARS-CoV-2: an observational cohort study The Lancet Infectious Diseases 2020 5 20 5 565 574 10.1016/S1473-3099(20)30196-1 32213337 12 He X Lau EHY Wu P Deng X Wang J Hao X Lau YC Wong JY Guan Y Tan X Mo X Chen Y Liao B Chen W Hu F Zhang Q Zhong M Wu Y Zhao L Zhang F Cowling BJ Li F Leung GM Temporal dynamics in viral shedding and transmissibility of COVID-19 Nat Med 2020 5 15 26 5 672 675 10.1038/s41591-020-0869-5 32296168 32296168 13 Mizumoto K Kagaya Katsushi Zarebski Alexander Chowell Gerardo Estimating the asymptomatic proportion of coronavirus disease 2019 (COVID-19) cases on board the Diamond Princess cruise ship, Yokohama, Japan, 2020 Euro Surveill 2020 3 25 10 10.2807/1560-7917.ES.2020.25.10.2000180 32183930 14 Wölfel Roman Corman VM Guggemos W Seilmaier M Zange S Müller Marcel A Niemeyer D Jones TC Vollmar P Rothe C Hoelscher M Bleicker T Brünink Sebastian Schneider J Ehmann R Zwirglmaier K Drosten C Wendtner C Virological assessment of hospitalized patients with COVID-2019 Nature 2020 5 1 581 7809 465 469 10.1038/s41586-020-2196-x 32235945 32235945 15 Wang Wenling Xu Yanli Gao Ruqin Lu Roujian Han Kai Wu Guizhen Tan Wenjie Detection of SARS-CoV-2 in Different Types of Clinical Specimens JAMA 2020 5 12 323 18 1843 1844 10.1001/jama.2020.3786 32159775 32159775 16 Bosworth A Whalley C Poxon C Wanigasooriya K Pickles O Aldera EL Papakonstantinou D Morley GL Walker EM Zielinska AE McLoughlin D Webster C Plant T Ellis A Richter A Kidd IM Beggs AD Rapid implementation and validation of a cold-chain free SARS-CoV-2 diagnostic testing workflow to support surge capacity J Clin Virol 2020 7 128 104469 10.1016/j.jcv.2020.104469 32474371 32474371 17 Kampf G Todt D Pfaender S Steinmann E Persistence of coronaviruses on inanimate surfaces and their inactivation with biocidal agents J Hosp Infect 2020 3 104 3 246 251 10.1016/j.jhin.2020.01.022 32035997 32035997 18 Ma Q Shan H Zhang H Li G Yang R Chen J Potential utilities of mask-wearing and instant hand hygiene for fighting SARS-CoV-2 J Med Virol 2020 3 31 10.1002/jmv.25805 32232986 19 COVID-19 guidance British Society for Rheumatology 2020 11 5 2020-07-15 https://www.rheumatology.org.uk/practice-quality/covid-19-guidance 20 COVID-19: information for the respiratory community British Thoratic Society 2020 11 13 2020-07-15 https://www.brit-thoracic.org.uk/about-us/covid-19-information-for-the-respiratory-community/ 21 Xu L Mao Y Chen G Risk factors for severe corona virus disease 2019 (COVID-19) patients : a systematic review and meta analysis medRxiv. Preprint posted online April 18, 2020 10.1101/2020.03.30.20047415 22 Chen R Liang W Jiang M Guan W Zhan C Wang T Tang C Sang L Liu J Ni Z Hu Y Liu L Shan H Lei C Peng Y Wei L Liu Y Hu Y Peng P Wang J Liu J Chen Z Li G Zheng Z Qiu S Luo J Ye C Zhu S Liu X Cheng L Ye F Zheng J Zhang N Li Y He J Li S Zhong N Medical Treatment Expert Group for COVID-19 Risk Factors of Fatal Outcome in Hospitalized Subjects With Coronavirus Disease 2019 From a Nationwide Analysis in China Chest 2020 7 15 158 1 97 105 10.1016/j.chest.2020.04.010 32304772 32304772 23 The OpenSAFELY Collaborative Williamson E Walker AJ Bhaskaran KJ Bacon S Bates C Morton CE Curtis HJ OpenSAFELY: factors associated with COVID-19-related hospital death in the linked electronic health records of 17 million adult NHS patients medRxiv. Preprint posted online May 07, 2020 10.1101/2020.05.06.20092999 24 Zheng Z Peng F Xu B Zhao J Liu H Peng J Li Q Jiang C Zhou Y Liu S Ye C Zhang P Xing Y Guo H Tang W J Infect 2020 8 81 2 e16 e25 10.1016/j.jinf.2020.04.021 32335169 25 Darnell ME Subbarao K Feinstone SM Taylor DR Inactivation of the coronavirus that induces severe acute respiratory syndrome, SARS-CoV J Virol Methods 2004 10 121 1 85 91 10.1016/j.jviromet.2004.06.006 15350737 15350737 26 Simons D Brown J Shahab L Perski O Smoking and COVID-19: Rapid evidence review for the Royal College of Physicians, London (UK) Qeios 2020 4 01 10.32388/vgjcun 27 Yang Y Yang M Shen C Wang F Yuan J Li J Zhang M Evaluating the accuracy of different respiratory specimens in the laboratory diagnosis and monitoring the viral shedding of 2019-nCoV infections medRxiv. Preprint posted online February 17, 2020 10.1101/2020.02.11.20021493 28 Li D Jin M Bao P Zhao W Zhang S Clinical Characteristics and Results of Semen Tests Among Men With Coronavirus Disease 2019 JAMA Netw Open 2020 5 01 3 5 e208292 10.1001/jamanetworkopen.2020.8292 32379329 32379329 29 Park WB Kwon N Choi S Kang CK Choe PG Kim JY Yun J Lee G Seong M Kim NJ Seo J Oh M Virus Isolation from the First Patient with SARS-CoV-2 in Korea J Korean Med Sci 2020 2 24 35 7 e84 10.3346/jkms.2020.35.e84 32080990 32080990 30 Caly Leon Druce Julian Roberts Jason Bond Katherine Tran Thomas Kostecki Renata Yoga Yano Naughton William Taiaroa George Seemann Torsten Schultz Mark B Howden Benjamin P Korman Tony M Lewin Sharon R Williamson Deborah A Catton Mike G Isolation and rapid sharing of the 2019 novel coronavirus (SARS-CoV-2) from the first patient diagnosed with COVID-19 in Australia Med J Aust 2020 6 212 10 459 462 10.5694/mja2.50569 32237278 32237278 31 Tse GM To K-f Chan P K-s Lo A W I Ng K-c Wu A Lee N Wong H-c Mak S-m Chan K-f Hui D S C Sung J J-y Ng H-k Pulmonary pathological features in coronavirus associated severe acute respiratory syndrome (SARS) J Clin Pathol 2004 3 01 57 3 260 5 10.1136/jcp.2003.013276 14990596 14990596 32 Chu DK Akl EA Duda S Solo K Yaacoub S Schünemann HJ Chu Dk Akl Ea El-harakeh A Bognanni A Lotfi T Loeb M Hajizadeh A Bak A Izcovich A Cuello-Garcia Ca Chen C Harris Dj Borowiack E Chamseddine F Schünemann F Morgano Gp Muti Schünemann Geu Chen G Zhao H Neumann I Chan J Khabsa J Hneiny L Harrison L Smith M Rizk N Giorgi Rossi P AbiHanna P El-khoury R Stalteri R Baldeh T Piggott T Zhang Y Saad Z Khamis A Reinap M Duda S Solo K Yaacoub S Schünemann Hj Physical distancing, face masks, and eye protection to prevent person-to-person transmission of SARS-CoV-2 and COVID-19: a systematic review and meta-analysis The Lancet 2020 6 01 395 10242 1973 1987 10.1016/S0140-6736(20)31142-9 32497510 33 Tang J W Li Y Eames I Chan P K S Ridgway G L Factors involved in the aerosol transmission of infection and control of ventilation in healthcare premises J Hosp Infect 2006 10 64 2 100 14 10.1016/j.jhin.2006.05.022 16916564 16916564